FN-1010 Iot Capable Soldering Station 230V

• Improve traceability
• Minimize human error
• Optimize soldering conditions
• IoT capable

Features

Enables human error-free temperature control and traceability of manual soldering process

The FN-1010 and FG-100B are equipped with communication function.

"Process control" and "Traceability" can be established through daily manual soldering operation.

Optimization of soldering conditions is now possible based on a variety of information in daily soldering process collected by FN-1010.

 Information to be collected
The following information can be collected by memory chip in T36 series tip and saved in a computer through a soldering station.

• Tip shape
• Tip Serial number
• Number of loads
• Total time of power supplied
• Load sensitivity
• Type of solder alloy (Lead-Free / Lead)
• Count alarm

Automatic calibration/off-set can be completed once measurement result is sent through infrared.

• Human error-free "tip temperature calibration " and "off-set" can be established through daily manual soldering process.
• Results of measurement/calibration/off-set can be recorded automatically.

Visualize energy supplied during soldering

• It is now possible to visualize invisible energy supplied from T36 series tip during soldering.
• And that makes it possible to control factors of soldering, which were impossible before.

HAKKO FN-1010 Soldering Station

Real-time work status on the LCD screen

Improved button operation

• Quick access to "Preset temperatures" and "Off-set mode" with one push.

Notification of alarm with sound and vibration

• Alarm can be notified with vibration in a noisy environment.

Free fall detection function

• Built-in motion sensor detects free fall and cuts the power. It can prevent burning floor, a fire and other accident with the heat.

Tip cleaner with solder ball preventive design

• Solder ball during tip cleaning can be reduced by 99% with devised cleaner designs such as smaller aperture, and set angle as well as position.

HAKKO FG-100B Thermometer

Eliminate human error in manual recording of measurement result by using FG-100B

• Human errors in manual recording process and time for recording can be eliminated by sending measurement result from FG-100B to FN-1010.
• Minimize individual difference in timing of completion of measurement and reading measurement result

Specifications

Model No. FN-1010

Power consumption: 100W

Temperature range: 50 to 450ºC

Temperature stability: ±3ºC

Station

Output voltage: AC 21V

Dimensions: 104(W)×138(H)×152(D)mm

Weight: 1.9kg

Soldering Iron

Power consumption: 95W (21V)

Tip to ground resistance: <2Ω

Tip to ground potential: <2mV

Heating element: Composite heater

Cord length: 1.2m

Total length: 180mm (with 2.4D tip)

Weight: 32g (with 2.4D tip)

* Total length and weight (w/o cord)

A soldering tip is not included with this product. The desired tips should be purchased separately.

Packing List: 

1. Station
2. Handpiece (FN-1101)
3. Tip cleaner (FT-401, with cleaning wire)
4. Power code
5. Iron holder (FH-210)
6. Instruction manual

Accessories

Soldering Tip

Parts

 Replacement Parts