FT700 Tip Polisher

$489.00

[This is a pre-order product and will take 6-8 weeks to arrive. Kindly view pre-order FAQs before purchasing.]

Soldering tip polisher best suited for the removal of oxidation on soldering tips
Oxidized films firmly sticking to tips are removed using a supplied brush
It prevents the shortening of service life of tips caused by oxidation

Please refer to the User Manual for detailed specifications.

Features

"Maintenance kit for oxidized soldering tips"

Especially suitable for soldering tips oxidized by Lead-free solder and high temperature solder By using the brush and accessory "Chemical Paste"HAKKO FS-100:

Carbide and oxide can be removed without causing damage to the soldering tip
Diamnonium phosphate is not included
Power saving with 3 watts low consumption.

Note: When the tip temperature is over 400ºC, even if the oxidation film is removed by "HAKKO FT-700 tip polisher", the tip can turn to be oxidized quickly again.

When carbide and oxide cannot be removed by the above procedure

When carbide and oxide are hard, they sometimes cannot be removed even by the HAKKO FT-700.
In this case, first use the brush which included in the unit as one of accessories and clean the tip by the above procedure.

Specifications

Model No.	Packing List
FT-710	Unit, Paste, Brush, Instruction manual

Specifications

Model No.	FT-700
Power consumption	3W (100V), 4.5W (110 to 120V, 220 to 240V)
Dimensions	70(W)×54(H)×101(D)mm
Weight	0.65kg

Chemical Paste

Amount	10g
Ingredients	Flux, tin(Sn) 50wt%(each)

* Weight (w/o cord)
* The flux component of chemical paste consists of Alicyclic amine hydrobromate, Aliphatic amine hydrobromate, Petrolatum, Wax. Make sure the tip is cleaned after use according to the cleaning procedure.
* Do not use the chemical paste for purposes other than restoring of the soldering tip.

Accessories

Replacement Parts

Name	Specifications
FS-100	HAKKO FS-100 paste
B3051	Brush
B3052	Polishing brush (qty 2)