Lead Cutter and Former 153 / 154
$1,530.00 SGD
$2,290.00 SGD
Availability: Pre-Order ONLY. Lead Time: 8-16 Weeks
- Lead cutter and former for axial components
- Lead cutting operation for taped components can be continuously performed using the same size settings once they are made
- Possible to use together with 152B (motor drive)
Features
- Cutting and forming for tape-type axial components and annealed copper lead wire
- Easy to use - simply set the taped components in place and turn the handle.
- Ideal for processing tape-type components. Improved, longer-life cutting blade for a clean, smooth cut.
- Sealed bearings for longer service life and greater durability and efficiency.
- Can be used for forming and cutting, forming only, or cutting only.
- Components with lead frame (multangular lead) are unsuitable.
- Can be combined with the Hakko 152B.
| 153 |
154 |
|
Cutting and forming

|
Cutting and forming

|
|
Forming

|
Forming

|
|
Cutting

|
Cutting

|
Specifications
|
Model No.
|
153
|
154
|
|
Forming size
|
5.6mm pitch
|
5mm pitch
|
|
Max.diameter of lead wire
|
Φ0.8mm (MAX.)
|
Φ0.5mm (MAX.)
|
|
Lead wire
|
For annealed copper lead wire only
|
|
Outer width of tape
|
85mm (MAX.)
|
|
Taping pitch
|
5mm
|
|
Dimensions
|
125(W) × 130(H) × 110(D) mm
|
|
Weight
|
2kg
|
* Square lead wire is not adapted.
* Weight (w/ handle, clamp)
Accessories
Replacement Parts
| Name |
Specifications |
| A1098 |
Bending wheel guide (P) for 153 |
| A1099 |
Bending wheel guide (H) for 153 |
| A1100 |
Bending wheel (P) for 153 |
| A1101 |
Bending wheel (H) for 153 |
| A1102 |
Bending wheel guide (P) for 154 |
| A1103 |
Bending wheel guide (H) for 154 |
| A1104 |
Bending wheel (P) for 154 |
| A1105 |
Bending wheel (H) for 154 |
| A1106 |
Cutting blade for 153 / 154 |
| A1094 |
Cutting wheel guide (P) for 153 / 154 |
| A1095 |
Cutting wheel guide (H) for 153 / 154 |
| A1096 |
Cutting wheel (P) for 153 / 154 |
| A1097 |
Cutting wheel (H) for 153 / 154 |
| B1387 |
Main shaft for 153 / 154 / 155 |
- We recommend to replace the P side and H side at the same time when you need to change wheel guide or wheel.
- If the parts cannot be removed from the shaft, a burr may have been formed on the shaft due to overtightening of the screws. In this kind of situation, please send for repairs.