HAKKO FA-430 100-240V Fume Extractor

• HEPA filter (High Efficiency Particulate Air Filter)
• Recommended for quiet laboratory and office
• Filters out 99.97% of particles greater than 0.3μm

Features

Excellent cost performance filters
FA-430 provides excellent filtering efficiency, 99.97% of particles greater than 0.3μm, by HEPA filter.

Filter replacement notification
Filter replacement notification function ensures excellent trapping efficiency can be maintained at all times. No matter how sophisticated a fume extractor is, if the filter is not replaced at the right time, it will not be able to give maximum performance. The HAKKO FA-430 detects the number of fan rotation and notifies the operator of the appropriate time to replace the filter, guaranteeing a comfortable working environment.

• When the pre-filter is 80% clogged or has been used for 200 hours, the orange indicator flashes on and off.
• When the 10th pre-filter needs replacing, the orange and red lamps flash on and off.

Quiet operation and powerful suction
Exhaust noise has been reduced without sacrificing suction performance by the addition of a silencer unit to the exhaust outlet to ensure smooth air outflow. A high-performance motor with 1,500 Pa of static pressure provides powerful suction and quiet operation.

Adjustable to suit working environment
Catch harmful smoke with freestanding ducts and adjustable air volume
Is your smoke absorber affected by air conditioning? Are you fed up with having to re-adjust ducts after every line change? The HAKKO FA-431 fume extractor is the answer to your problems.

Airflow adjustment
Three airflow modes are available: High, Medium, and Low. Significantly improve your working environment by using an airflow volume that suits the worksite and the job.

• Low mode: Not easily affected by the surrounding environment. For use in small, quiet locations. (For when low-noise operation is a priority.)
• Medium mode: For normal use.
• High mode: For use in locations that are significantly affected by the surrounding environment. (For when suction performance is a priority.)

Freestanding ducts
Ducts can be bent or lengthened as desired and maintain their shape after adjustment, letting you place them exactly where suction is needed. Say goodbye forever to ducts that are long, heavy, and hard-to-handle. The FA-430 Duct is 1.2m in length and weighs 0.6kg

Specifications

• Power consumption: 110W
• Noise level: 50dB (MEDIUM mode)
• Maximum suction capacity with single duct: MAX. 4.1m3/min. (145cfm)
• Maximum suction capacity with two ducts : MAX. 4.7m3/min. (167cfm)
• Filtering efficiency: 99.97% 0.3µm (LOW, MEDIUM mode)
• Filtering efficiency: 99.96% 0.3µm (HIGH mode)
• Static pressure: 1,500Pa
• Duct set (sold separately) Length of duct : Φ55mm×1.2m (ESD SAFE)
• Dimensions: 330(W)×366(H)×343(D)mm
• Weight: 7.5kg
• * Filtering efficiency is an initial value of collection efficiency based on counting method for airborne dust collected by a single plate of filter (unfolded).
• * Noise level is measured at a distance of 1 m from the face of unit in an anechoic room.
• * Net in duct sets are not protected against electrostatic discharge.

Accessories

Parts Required For Independent Ducts

Additional Required Parts for Bench Top Hood