Hot tweezers that enable easy removal of fine SMD chips and flat packages of up to 2mm in width. The composite-type design with a built-in heater facilitates the replacement of soldering tips.
Applicable for FM203 2-Port High Performance Rework Station and FM206 3-Port High Performance Rework Station. Please refer to the User Manual for detailed specifications.
SMD MINI PARALLEL REMOVER
The Hakko FM-2023 is designed for use with small chip components as small as 0201. The Mini Parallel Remover has a unique feature allowing it to work as a standard or reverse action tweezer. A simple flip of a switch sets the action of the tool.
The small grip ensures to remove the smallest chips easily.
Can choose standard or reverse tweezer action by switch lever.
Direct heating prevents damage to neighboring components on high density board.
ESD safe by design
FM2023-04: Connecting cable, Iron holder, Mini SMD Tweezers (Mini Parallel Remover), Soldering tip (T9-I), Component bed, Heat resistant pad, Instruction manual
Note: The soldering station has to be purchased separately
200°C - 400°C (400°F - 750°F)
±10°C (±28°F) of set temperature
±5°C (±9°F) at idle temperature
Tip to Ground Resistance
< 2 ohms
Tip to Ground Potential
< 2mV (Typical 0.6mV)
1.2m (4 ft.)
Total Length (w/o Cord and Tip)
75mm (3.0 in.)
Weight, Handpiece only (w/o cord)
32g (1.1 oz.)
Weight, T9-I tip
5g (0.18 oz.)
Tip, (I shape)
Heat resistant pad
Soldering Tip (T9 Series)
T9-I, T9-L1, T9-L2
Mini SMD Tweezers (Handpiece only)
Iron Holder with Cleaning Sponge, Power Save Function