HF-600 + FU-500 Auto Soldering Machine

• A smart way to build an Auto-soldering system
• 400 watts of ultra-high power for a wide range of automation
• HAKKO HF-600 can be combined with various robots and other actuators to build an automatic soldering process at low cost.
  * LCIA: Abbreviation for Low Cost Intelligent Automation
  * Robots are not included in the product.

Features

Easy tip replacement

The position of the tip end can be easily adjusted using the tip adjustment jig unit. Work can be started just by removing the iron from the main unit by removing two screws, positioning the tip using the tip adjustment jig unit, and returning the iron to the main unit.
Using another iron (FU-6001 or FU-6002) makes it possible to install a new tip in advance, minimizing equipment downtime.

Different Tips for Different Wattage

Introducing the new TX3 tips with new tip shapes for a wider range of application and better solder quality

• TX1 - 140W
• TX2 - 300W
• TX3 - 400W

Nitrogen soldering is also supported for increased wettability of solder.

Two types of soldering irons available

FU-6001 is straight, and FU-6002 is L-Shaped Iron.

Optional Parts:

N2 adapter assembly

Part No.BX1023 for TX1 Series　 BX1029 for TX2 Series
Simply attach the optional N2 adapter to the iron and install a nozzle assembly that matches the tip to perform N2 soldering.

Slide unit Part No.CX1000

The slide unit allows the soldering unit vertical movement.
As the solenoid valve comes pre-wired, the unit can be used by simply connecting to FU-500 via special connector and supplying compressed air externally.

Slide unit (for drag soldering) Part No.CX1001

If height varies during drag soldering due to the angle or other conditions of the sample, height variations can be absorbed by attaching this slide unit to the soldering unit.

Tip cleaner Part No.CX1003

The tip cleaner's rotating brush can remove not only excess solder but also flux carbides, which are difficult to remove from tips by compressed air.
It is possible to turn the brush on and off via an external signal.

Temperature probe Part No.CX1002

The tip thermometer unit can be placed under the tip to measure the tip temperature of an automatic soldering unit.

Packing List

• Station
• Soldering unit
• Iron unit fixing assembly
• Tip adjustment jig units 
• Iron cable
• Heat resistant pad
• Connecting cable (5 m)
• Power cord
• Flux protector
• Feeder unit attachment screw
• Instruction manual

Specification

Accessories

Soldering Tips

For HAKKO FU-601, soldering tips are not supplied as accessories. Please purchase soldering tips separately. Adapter assembly and Nozzle assembly are required to perform N2 soldering.

Replacement Parts

Optional Parts