Regular maintenance and cleaning of soldering tips is important to prevent oxidation. While it is common to use wet sponge or brass wire to clean the tips, such cleaning accessories might not be able to clean off the solder residue completely. Fret not, Hakko has the powered tip cleaners that will help you do the job!
These tip cleaners can clean the tips effectively and efficiently using the rotating brushes. Find out about our tip cleaners below!
Which Tip Cleaner Should I Choose?
If you are uncertain of which tip cleaner to choose from, check out the tables below to find one that suits you:
Hakko FT-700
Hakko FT-710
Hakko FT-720
Soldering tip polisher accompanied with FS-100 chemical paste that can remove oxidized films on the tips.
Automated cleaning activation
Interchangeable brushes that can be replaced easily.
Receptacle design can prevent solder from splashing
Can be mounted to the FH-101, FH-200 & FH-201 iron holders
Clean in approximately 2.3 seconds
Minimize decrease in temperature of the tip during cleaning process
Low-noise operation
Automated cleaning activation
Interchangeable brushes that can be replaced easily
Can be mounted to the FH-200 iron holder
Clean in approximately 0.94 seconds
Use fluoroplastic brush (Long-life duration)
Can clean variety of tips shapes
Hakko FT-710 Tips Compatibility
Hakko FT-720 Tips Compatibility
Receptacle A
T7 (JL02 & spatula shape not compatible)
T11
T12 (JL02, quad, tunnel and spatula shapes not compatible)
