The Hakko FM-2031 Nitrogen compatible Soldering Iron provides a higher mass tip with double the power of conventional T17 tips. This iron is ideal for soldering difficult-to-solder heavy ground planes and/or high heat sink applications.
The N2gas and preheating effect have achieved significant improvement in soldering work! N2 soldering iron providing 140W high output.
Please refer to theUser Manualfor detailed specifications.
Preventing oxidation The Nitrogen gas (N2) runs into the nozzle assembly and covers the soldering tip. This prevents the soldering tip and the heater from being readily oxidized and aids in preheating.
Improved wettability A sufficiently hot soldering tip has a more efficient heat transfer, improving the solder wettability and spreadability. Heated N2gas improves solderability, and prevents components from getting bridges when working even with lead-free solder or high-temperature solder.
Preheating effect N2gas assists soldering iron to heat the objects effectively. It contributes to work at lower setting temperature without spoiling work efficiency.
Must be used with T22 tips (not included)
Compatible with the Hakko FM-203 soldering station and FM-206 rework system
Powerful thermal recovery
Can be used in combination with your existing high power soldering station, HAKKO FM-206 or HAKKO FM-203.
N2System. Can be used in combination with the HAKKO FX-780/FX-781 and FX-791 to create an N2System.
IMPORTANT. PLEASE READ: The FM-2031 can only be attached to the Hakko FM-203 "D" port, and the Hakko FM-206 CH2 or CH3 ports. If you attach the iron to any other port, a grip error or connector error (C-E) will occur.
Note: This unit does not include neither a soldering tip nor a nozzle assembly. When purchasing this unit, please buy your desired soldering tip and with nozzle assembly together.
Note: Nozzle Assembly Required when using nitrogen Nozzle assemblies are required in order to properly envelop the tip when using nitrogen. Nozzle assemblies are made to fit specific shape tips. Please choose the appropriate nozzle assembly for your tip selection based on the chart below.
FM2031-01 (handpiece only)
140W / 24VAC
200 - 500°C (400 - 930°F)
Tip to Ground Resistance
Handpiece Total Length (w/o cord)
231mm (9.1 in.)
Handpiece Weight (w/o cord)
47g (1.7oz) (with 2.4D tip and Nozzle Assy E)
1.3m (4.3 ft.)
T22 Series (not included)
Varies by tip (not included)
Packing List: N2 soldering iron (HAKKO FM-2031), Iron holder, Connecting cable, Heat resistant pad, Instruction manual
For the HAKKO FM-2031, soldering iron tips and nozzle assembly are not supplied as accessories. Please separately purchase "T22 Series" soldering iron tips and a compatible nozzle assembly onto the tip.