FM204-12 Desoldering Tool 230V

• Vacuum pump type desoldering tool with excellent thermal recovery
• Digital display ensures easy and reliable temperature control
• Sleep function that works with iron holder curbs the oxidation of nozzles
• The integrated nozzle containing both heating element and sensor provides higher thermal recovery than conventional tips.

Features

The integrated nozzle containing both heating element and sensor provides higher thermal recovery than conventional tips.

Soldering work is possible by replacing the handpiece.

Connectible handpieces: 

• Desoldering handpiece (HAKKO FM-2024)
• Soldering iron (HAKKO FM-2027)
• N2 soldering iron (HAKKO FM-2026)

Selectable grip

Two-way use of gun type and straight type is available.

Easy maintenance

Filter pipe replacement:

• Disposable paper filter pipe
• Easy to dispose of paper and solder separately

Nozzle replacement:

• Safe to replace with nozzle remover
• Replaceable even before the end of nozzle has cooled down

Power save function

Sleep function: When the handpiece is placed on the Iron Holder (FH200-01/FH200-02), the sleep function operates and decreases the unused tip temperature up to approximately 200°C , preventing the tip from being oxidized.

In addition, this function can relieve the loads applied to the tip due to the high-temperature settings required for lead-free soldering

* The connecting cable enables the iron holder and temperature controller to be activated.

Auto power shut-off function: By connecting the iron holder (HAKKO FH-200) to the connecting cable, the auto power shut-off function is activated in the same manner as the sleep function.

Selectable buzzer and alert ON/OFF setting Buzzer and alert sound generation upon error and when reaching the setting temperature can be selected. ON/OFF-settable buzzer sound

Specifications

Model No. FM-204

Power consumption:120W

Temperature range  FM-2024 : 350 to 450ºC

FM-2026/2027 : 200 to 450ºC

Temperature stability: ±5ºC at idle temperature

Station

Output voltage: AC 24V

Vacuum generator: Vacuum pump, double cylinder type

Vacuum pressure: Max. 80kPa (600mmHg)

Suction flow:15L/min.

Dimensions: 160(W)×120(H)×225(D)mm

Weight: 3.7kg

Desoldering Tool

Power consumption: 70W (24V)

Nozzle to ground resistance: <2Ω

Nozzle to ground potential: <2mV

Heating element: Composite heater

Cord length: 1.2m

Total length: 180mm (with Φ1.0mm nozzle)

Weight: 65g (with Φ1.0mm nozzle)

* The suction flow is measured at the filter case suction port of station.

* Total length and weight (w/o cord, hose)

 Accessories

Soldering Tips

Replacement Parts

 Optional Parts