Hakko FR-702 Repair System 230V
Hakko FR-702 Repair System 230V
Availability: PRE-ORDER | LEAD TIME: 10-16 WEEKS
- Powerful rework stations that contain every function needed for rework
- Safer and more secure rework operation
- With upgraded all the applications
- 4-in-1 unit for space saving
- Compatible with N2 system by purchasing N2 iron (FX-8802) as an optional accessary
Please refer to the User Manual for detailed specifications.
Click to shop compatible tips and nozzles:
| Tips | Nozzles |
| T18 Series |
Features
4 Port Rework Station with 140 W desoldering gun, M-type soldering iron and 670W hot air
-
It handles various soldering, desoldering and reworking by choosing proper handpieces from a selection of 7 types.
Other than the standard handpieces of 140 W desoldering gun, M-type soldering iron and high power & large volume hot air, there are 4 more applications. Consumed tip nozzle and heating element can be replaced individually, and running cost is much lower than the composite type.
- High-power Desoldering gun HAKKO FR-4103
- Long type nozzles for narrow space
- Oval shape nozzles for flat terminals
- SS type nozzles for micro land-patterns
- Soldering iron HAKKO FX-8801/FX-8805
Thermal conductivity has been increased by reviewing external configuration and internal structure of 900 tip series. Now T18 and T19 tip series are selectable depend on work environment.
- Hot air handpiece
670 W high power and large volume hot air improves work efficiency.
- High power and large volume hot air for quick removal of components. New type of nozzles for improvement of temperature characteristics
The new nozzle improves work efficiency with uniform heating by hot air convection inside the nozzle which is created due to vents on the nozzle top. (only with BGA nozzles)
- Vacuum pickup function
The vacuum pick up function is to pick up a component with a suction pad and vacuum. It will pick a component only after the hot air melts solder joints. This can avoid an error to peel off the land by removing a component with excessive force.
- Pickup indicator lets you know the pickup timing at a glance!
By pre-setting pickup function, a component can be picked up automatically when solder is melted. Then, the indication comes up and the moment of picking up will be visible.
Even a component and solder joints cannot be seen as covered by a nozzle, easy and safe picking up is possible.
- N2 soldering iron HAKKO FX-8802
The N2 gas runs into the nozzle assembly and covers over the soldering tip. It prevents the soldering tip and the heater from being readily oxidized and performs great role as a preheating.
Two effects of N2 system, preventing oxidation or preheating effect, can improve soldering defects such as bridging, protrusion icicle, insufficient solder filling in PTH, etc.
T18 tips series are compatible with this application.
- One-hand Manual-solder-feed iron HAKKO FX-8803
- Solder and feed with one hand
- Feed a set amount of solder with one hand
- Manual feed system is perfect for cellular manufacturing.
- Soldering work can be conducted at the pace of the operator.
- T18 tips series are compatible with this application.
- SMD Hot Tweezer HAKKO FX-8804
- Direct heating—less influence upon surrounding components on crowded boards.
- Easily removes SMD chips and flat packages up to 25mm.
- The collet allows easy replacement and alignment of the tips.
Packing List
- Station
- Soldering iron (FX-8801)
- Desoldering gun (FR-4103)
- Iron holder for soldering gun (with cleaning wire)
- Iron holder for desoldering iron (with cleaning sponge, cleaning wire)
- Tool box (Cleaning pin for ø1.0 mm, Cleaning pin for heater
- Cleaning drill for ø1.0 mm, Nozzle wrench
- Filter [qty 2], Ceramic paper filter [qty 4])
- Handpiece holder for hot air
- Pad (Φ3mm, Φ5mm, Φ7.6mm: qty 2 each
- Heat resistant pad
- Vacuum Pipe Control Knob (L with screw)
- Color band (qty 2)
- Power cord
- Instruction manual
Specifications
| Model No. | FR-702(Desoldering tool: FR-4103) |
|---|---|
| Power consumption | 1,030W |
Station
| Dimensions | 370(W)×150(H)×220(D) mm |
|---|---|
| Weight | 9 kg |
Station (Soldering)
| Output voltage | AC 26V |
|---|---|
| Temperature range | 50 to 480ºC |
| Temperature stability | ±1ºC at idle temperature (When set to 200 to 480ºC) |
Station (Desoldering)
| Output voltage | AC 24V |
|---|---|
| Vacuum generator | Vacuum pump, double cylinder type |
| Vacuum pressure | 80kPa (600mmHg) |
| Suction flow | 15L/min. |
| Temperature range | 330 to 450ºC |
| Temperature stability | ±5ºC at idle temperature |
Station (Hot air)
| Power consumption | 30W |
|---|---|
| Air flow | 1 to 9 (5 to 115L/min.) L/min. |
| Temperature range | 50 to 600ºC |
Soldering iron
| Power consumption | 65W(26V) |
|---|---|
| Tip to ground resistance | <2Ω |
| Tip to ground potential | <2mV |
| Heating element | Ceramic heater |
| Standard tip | Shape-B (No.T18-B) |
| Cord length | 1.2m |
| Total length | 222 mm (with B tip) |
| Weight | 52 g (with B tip) |
Desoldering Gun
| Power consumption | 140W (24V) |
|---|---|
| Nozzle to ground resistance | <2Ω |
| Nozzle to ground potential | <2mV |
| Heating element | Composite heater |
| Standard nozzle | Φ1.0mm S type (No.N61-05) |
| Cord length | 1.2 m |
| Total length | 168 mm (with Φ1.0mm S type nozzle) |
| Weight | 190g(with Φ1.0mm S type nozzle) |
Handpiece (Hot air)
| Power consumption | 670W |
|---|---|
| Total length | 250mm |
| Weight | 180g |
* The suction flow is measured at the filter case suction port of station.
* Airflow capacity is rated as free flowing. Restrictions created by various nozzles may reduce the maximum airflow capacity.
* Total length and weight (w/o cord, hose)
Accessories
T18 Series. Shape BC/C/B/D/I/J/K/N61/N51
Replacement Parts
|
Name |
Specifications |
|
Soldering iron FX-8801, 65W (26V), w/B tip |
|
|
Heating element, 65W (26V) |
|
|
B5122 |
Enclosure pipe assembly |
|
FR4103-81 |
Desoldering tool FR-4103 |
|
A5055 |
Heating element 140W (24V), for FR-4103 |
|
B5222 |
Enclosure pipe for FR-4103 |
|
B5185 |
Filter pipe assembly |
|
B5105 |
Filter pipe assembly |
|
A5044 |
Ceramic paper filter-L (qty 10) |
|
A1033 |
Ceramic paper filter-L (qty 10) |
|
Pre-filter |
|
|
Front holder |
|
|
Filter holder |
|
|
Filter (qty 10) |
|
|
A1013 |
Diaphragm (qty 2) |
|
Valve plate (qty 2) |
|
|
B5045 |
Pipe |
|
B5049 |
Mica with heater protection sleeve |
|
B5048 |
Iron holder |
|
Heat resistant pad |
|
|
C5030 |
Tool box |
|
B5106 |
Nozzle wrench |
|
Cleaning pin for nozzle Φ1mm |
|
|
B1215 |
Cleaning pin for heating element |
|
Cleaning drill for nozzle Φ1mm |
|
|
B1306 |
Drill holder nozzle Φ0.8/1mm |
|
B1309 |
Drill (nozzle Φ1mm, qty 10) |
|
FH800-03BY |
Iron holder <w/ cleaning sponge, cleaning wire> blue and yellow |
|
Cleaning sponge for FH-800 |
|
|
A1561 |
Cleaning wire for FH-800 |
|
FH410-82 |
Iron holder <w/ cleaning wire> for FR-4103 |
|
Cleaning wire |
|
|
A1438 |
Pad/7.6mm (qty 5) |
|
A1439 |
Pad/5mm (qty 5) |
|
A1520 |
Pad/3mm (qty 5) |
|
B3023 |
Vacuum pipe control knob (L) with screw |
Options
|
Part No. |
Name |
|
FX8802-01 |
Soldering iron FX-8802 65W (26V), w/B tip, for N2 soldering |
|
FX8803-02 |
Soldering gun FX-8803 65W (26V), w/3CF tip |
|
FX8803-03 |
Soldering gun FX-8803 65W (26V), w/3CF tip |
|
FX8803-04 |
Soldering gun FX-8803 65W (26V), w/3CF tip |
|
FX8804-02 |
SMD hot tweezer FX-8804 65W (26V), w/2L tip |
|
FX8804-03 |
SMD hot tweezer FX-8804 65W (26V), w/2L tip |
|
FX8804-04 |
SMD hot tweezer FX-8804 65W (26V), w/2L tip |
|
FX8805-01 |
Soldering iron FX-8805 65W (26V), w/B tip, for soldering (L type) |
|
C5046 |
Nozzle quick changer for FR-4103, FR-301 |
|
B5228 |
Receptacle for C5046 |
|
B5230 |
Oval nozzle positioning jig for FR-4103 |
|
Iron holder <w/ cleaning sponge> for 951,952,958,959 (Discontinued) and FX-8803 |
|
|
FH800-04BY |
Iron holder <w/ cleaning sponge> blue & yellow, for FX-8804 |
|
B3666 |
Holder clip |
|
Cleaning pin for nozzle Φ0.8mm |
|
|
Cleaning pin for nozzle Φ1.3mm |
|
|
Cleaning pin for nozzle Φ1.6mm |
|
|
B5141 |
Cleaning drill for nozzle Φ0.6mm |
|
Cleaning drill for nozzle Φ0.8mm |
|
|
B1304 |
Cleaning drill for nozzle Φ1.3mm |
|
B1305 |
Cleaning drill for nozzle Φ1.6mm |
|
B5142 |
Drill holder for nozzle Φ0.6mm |
|
B1307 |
Drill holder for nozzle Φ1.3/1.6mm |
|
B5143 |
Drill (nozzle Φ0.6mm, qty 10) |
|
B1308 |
Drill (nozzle Φ0.8mm, qty 10) |
|
B1310 |
Drill (nozzle Φ1.3mm, qty 10) |
|
B1311 |
Drill (nozzle Φ1.6mm, qty 10) |
|
B5126 |
Air guard assembly with air guard fixing bracket |
|
C5027 |
Board holder |
|
C5028 |
Grip fixture M set with hexagon wrench, o-ring and tray |
|
C5029 |
Grip fixture L set with hexagon wrench and o-ring |
|
B5098 |
Board clip |
|
B5136 |
Board support unit |
|
B5138 |
Positioning unit |
|
B5137 |
Rubber foot |
|
Cleaning sponge yellow |
Collapsible content
Pre-Order FAQs
View our full list of FAQs here
What is a pre-order?
Pre-orders are products that Hakko Product sells but do not maintain inventory on-hand. These usually include products with short shelf-lives or niche products.
Why should I pre-order?
Purchasing a pre-order item helps us order exactly the right amount of stock. It is a great way to secure an item and reduce wastage!
Having the item as pre-order means that we do not have to stock up our products unnecessarily, which may lead to faulty wiring or electronics in the long run. With pre-orders, you can be rest assured that the purchased products are brand-new and working well, not something that's been left on the shelf for years!
How does a pre-order work?
To secure your item, full payment is due at checkout. Manual payments must be received with the order number in order for us to proceed. When the item arrives at our warehouse, we will process the item within 2-3 business days. Each pre-order product will take approximately 6-8 weeks, but we will definitely ship it out earlier if we have existing stock from a previous shipment.
How do I know if an item is a pre-order?
All pre-order items will be marked "pre-order" and will have an estimated shipping date in the description.
What if I want to purchase a pre-order item together with items that are in stock?
The entire order will be held until the pre-order item has arrived and all the items can be delivered together. If you would like your in-stock purchases to be delivered first, kindly purchase the items separately.
Pre-order Disclaimer
Because the item has not reached us, we can not guarantee the exact date your item will ship. Each pre-order item has an estimated shipping date but this may be subjected to changes without prior notice, due to many reasons out of our control (shipping, weather, stock level from Hakko Corporation etc).
Unfortunately, we are unable to cancel any orders after payment has been processed. If for any reason we are not able to fulfill your pre-order, we will reach out to you to settle refunds.
Should I contact Hakko Products for a more precise delivery estimate for my order?
Upon receiving your order, Hakko Products immediately requests for the delivery of the item. Our sales will reach out to you if there are any changes to the delivery timings. As mentioned above, we are unable to guarantee the exact date of shipment. We seek your patience and understanding in this matter.
I've been waiting for too long! Can I cancel my pre-order?
By adding to cart and proceeding with payment, you have agreed to the waiting time as stated in each product listing. We are unable to perform cancellations after payment has been processed. Refund requests for pre-orders will only be entertained if two weeks has passed since the stated waiting time and the product has not been delivered.
For refunds due to defective or damaged goods, kindly reach out to our sales team.
Can't find a specific product?
Contact us via e-mail and we will look into bringing it to our stores! Sometimes, we may plan not to maintain physical inventory for certain products but if it’s something you are interested in, we can have a discussion on it.